MAX-11k Upper Receiver and Accessories
This upper receiver is designed to be used with the SWD M-11/9
submachine gun. NFA (National Firearms Act, Title 26, United States Code)
rules apply to its use and possession.
It is the owners/users responsibility to comply with all local, State and
Federal laws and regulations in the use of this product.
Possession of this upper receiver with a semi-auto M-11/9 lower receiver is illegal and potentially dangerous.
MAX-11k Upper Receiver
MAX-11k Upper Receiver
|Description||PRICE||Slow fire upper receiver for the M-11/9 SMG. 740,750, 950, 1140 RPM rates of fire available. Features a full length accessory rail on the top and integrated K-Grip on bottom. Mounting points on sides for additional accessory rails. Side cocking, reciprocating charging handle on left side. Designed for use with removeable AR-15/M-16/M-4 sights (not included), or can be used with just a scope installed. Comes complete with upper receiver, bolt assembly, cocking knob, barrel, Bull Nose Thread Protector and manual. Drop-in assembly requires no modification to your lower receiver. #509A||$795.00||Backordered|
MAX-11k Mod 1 Upper Receiver
|Description||PRICE||This upper receiver is the same as the MAX-11k except instead of a K-grip on the front, it has a short Picatinny rail. #526A||$795.00||Backordered|
MAX-11Sk Upper Receiver
|Description||PRICE||The MAX-11Sk upper receiver can be used with the M-11/9 submachine gun. NFA rules apply to the use of this upper with a semi-auto pistol upper receiver, due to the K-Grip on the front. This upper receiver is also a great upper to use with your Tungsten Slow Fire Bolt (CF-W). Features a full length accessory rail on top and integrated K-Grip on bottom.. Made from 6061 aluminum and finished in black, hard coat anodize. 5-3/4 inch length barrel threaded 1/2-28 at the muzzle with Bull Nose Thread Protector installed. Cocking piece is non-reciprocating. Does not include a bolt assembly.||$480||Backordered|
|MAX-11Sk YouTube Video|
MAX-11Sk Mod 1 Upper Receiver
|Description||PRICE||The MAX-11Sk Mod 1 upper receiver can be used with either the M-11/9 submachine gun or semi-auto pistol lower receiver. This upper receiver is also a great upper to use with your Tungsten Slow Fire Bolt (CF-W). Features a full length accessory rail on top and bottom. Made from 6061 aluminum and finished in black, hard coat anodize. 5-3/4 inch length barrel threaded 1/2-28 at the muzzle with Bull Nose Thread Protector installed. Cocking piece is non-reciprocating. Does not include a bolt assembly.||$480||Backordered|
|MAX-11Sk YouTube Video|
Lage Fixed Sights
Lage-Low Profile Sights
|Description||PRICE||Low profile sights that cowitness with Aimpoint T1 or similar sights. Front sight has a fixed steel blade that is replaceable. Rear sight is adjustable for windage and elevation. A low mounting stock is recommended to get a comfortable cheek weld. Sight line is 0.625" above top of Picatinny rail. Made from 6061 aluminum finished in hard coat black anodize and steel finished in manganese phosphate. #243A||$144.98/pair|
Front and rear fixed sights
|These front and rear fixed sights machined from 6061 Aluminum and finished in black anodize. Front and rear sight hardware are standard M16-A1 parts. Sights are designed to be used with an Aimpoint T1 sized scope (or Primary Arms) with a 1/2" riser. Sights cowitness in the lower 1/3, in this configuration. Sight line is 1.025" above top of Picatinny rail. Rear sight weighs 1.7 oz. Front sight weighs 1.0 oz. #238||$119.98|
"k" Side Accessory Rails
|Description||Projected PRICE||Left and right side accessory rails for attaching additional accessories to the sides of the MAX-11k and MAX-31k Upper Receivers such as flashlights or lasers. Made from 6061 aluminum and finished in hard coat black anodize. 2.8" long, 4 slots. All mounting hardware provided. #407A||$34.99/pair|
Mk2 Extended Cocking Knob
Extended Cocking Knob, mk2
|Description||PRICE||Extended cocking knob for use exclusively with the MAX-11 mk2, MAX-11k, MAX-10/9 mk2 and MAX-10/45 mk2 Upper Receivers. 1/2" longer than the stock cocking knob to allow use with scopes or mounting systems that may interfere with the standard cocking knob. #606A||$29.99|
Variable Buffer System
|Description||PRICE||The VBS is a Variable Buffer System consisting of three buffer spacers. When installed in the MAX-11k,
the rate of fire can be easily changed to 750, 950 or 1140 RPM.
The 750 RPM rate of fire is achieved by installing a single buffer spacer, two buffer spacers achieve a rate of fire of 950 RPM and three increase the rate of fire to 1140 RPM.
These rates of fire were achieved with Winchester 115 gr. full metal jacket, round nose ammunition. Ammo that has heavier or lighter bullet weight or is more or less powerful will have a different rate of fire.
While the VBS was designed with the intention of being used with our MAX-11k upper receiver, it can also be used with a stock M-11/9 to vary the rate of fire.
The VBS easily installs on your bolt assembly by simply installing it between the rubber buffer and the back of the bolt assembly. It is securely held in place with the ejector rod.
The VBS-3 is priced at $30.00 and includes three spacers. Individual spacers can be purchased for $10.00 each. #420
Single Buffer. #421
The MAX-11k comes standard with a 1/2-28 threaded barrel and a Bull Nose Thread Protector installed. These barrels are for if you need a replacement.
5-3/4" Replacement Barrel
|Description||PRICE||Made from 4140 Chrome Moly steel, these 5-3/4" long barrels are finished in black oxide. Muzzle threaded 1/2-28. #47||$86.00|
Bull Nose Thread Protector, 1/2-28 Thread
|Description||PRICE||Bull Nose Thread Protector for 1/2-28 threaded barrels. Designed for use with our MAX-11k, this thread protector can be used on any 9mm barrel threaded 1/2-28. 1" O.D. x 1-5/16" long with a knurl to provide an easy grip to install or remove the thread protector. An O-Ring installed in the thread protector seats against the barrel collar and prevents it from loosening or unscrewing during use. #429||$25.00|
HK 3-Lug Adapter, 1/2-28 Thread
|Description||PRICE||HK 3-Lug adapter threaded 1/2-28. We do not sell a dedicated 3-Lug barrel for the MAX-11k. You can add this adapter to use your 3-Lug suppressor. Mounts to any 1/2-28 threaded barrel muzzle. Manufactured by TROS. #610||$60.00|
"k" Folding Stock
|Description||Projected PRICE||This Folding Stock was originally designed for our MAX-11k upper receiver, but it is compatible with all of our uppers and
aftermarket M-11/9 upper receivers with taller sights than the OEM upper.
This stock features a folding mechanism that folds the stock down at a three degree angle to provide a generous clearance around the cocking knob on the left side of the upper receiver. It is designed with a thinner profile to fold very flat and provide a slim package. The folding stock mechanism and stock cheek bar are made from black anodized 6061 aluminum and the buttpad is made from black polymer. The stock adapter that attaches to the lower receiver of the M-11/9 is made from aluminum and is finished in black anodize. Length from the butt to the rear of the stock adapter plate is 9-1/2". Available in lengths as short as 8". #327A
|Description||PRICE||This collapsible stock is a drop-in replacement for the wire form stock that comes with the M-11/9. Sturdy construction will not fold up in use. Two extendable positions to allow for heavy clothing, tactical vest or smaller shooters. #30||$99.00|
Fixed Buttstock, 8-7/8"
|Description||PRICE||This durable black polymer buttstock is is designed for use with the aftermarket M-11/9 upper receivers with higher sights or optics. This buttstock features a sling mount on the top rear of the buttstock. Easily installs with one screw and a threaded block that drops inside the lower receiver. Measures 8-7/8" from rear of receiver to end of buttpad. Length from backstrap of grip to buttpad is 11-1/2" Also available in 1" and 2" shorter length. Weighs 10.2 Ounces. ONLY FOR USE WITH M-11/9 SMG. #305|
|6-7/8" Stock. #303||$129.98|
|7-7/8" Stock. #304||$129.98|
|8-7/8" Stock. #305
Left Folding Buttstock, 8-1/2"
|Description||PRICE||This durable black polymer buttstock is is designed for use with the aftermarket M-11/9 upper receivers with higher sights or optics. This left folding buttstock features a sling mount on the top rear of the buttstock. When folded, it will not interfere with operation of the subgun. Easily un-folds and solidly locks in place. Installs with one screw and a threaded block that drops inside the lower receiver. Measures 8-1/2" from rear of receiver to end of buttpad. Length from backstrap of grip to buttpad is 12-1/4". Also available in 1" shorter or 1" longer length. Weighs 14.7 Ounces. #309|
|7-1/2" Folding Stock||$209.99|
|8-1/2" Folding Stock. #310
|9-1/2" Folding Stock. #311||$209.99|
Canted Stock Adapter
|Description||PRICE||Canted Stock Adapter is designed for use with our Folding Stock Mechanism to allow the butt stock to swing low and out of the way of the cocking knob. This provides greater clearance around the cocking knob, making it easier to access. The Canted Stock Adapter consists of two angled shims. One is placed between the folding mechanism and the stock adapter and the other is placed between the folding stock mechanism and the stock. Can be used with any ACE Rifle Stock patterned folding stock mechanism and stocks with two #10-32 mounting screw holes spaced 5/8" (.625") apart. #326A||$24.99|
ACE Rifle Stock Adapter
|Description||PRICE||This stock adapter is designed for use with the MAX-11 mk2, MAX-31 mk2 and MAX-31A mk2 Slowfire Upper Receivers or other receivers with higher sight lines or scopes attached. Attaches to M-11/9 or M-11A1 lower receiver. Allows use of buttstocks manufactured by ACE LTD. USA. #32||$79.00|
AR15 Stock Adapter, M-11/9, M-11A1
|Description||PRICE||This stock adapter is designed for use with the MAX-11 mk2, MAX-31 mk2 and MAX-31A mk2 Upper Receivers or other receivers with higher sight lines or scopes attached. Attaches to M-11/9 or M-11A1 lower receiver. Allows use of AR-15 buttstocks. 1/2" of vertical adjustment. #611||$109.00|
Lage Folding Stock Mechanisms (FSM)
The Lage Folding Stock Mechanism (FSM)fits between the Stock Adapter and Stock.
Lage FSMs are designed to be easier to open than competitors' designs. Wrap your fingers around the stock
and put your thumb on top of the hinge pin and squeeze. Easily pops open. Locks in open or closed position,
pull from the side to deploy.
Our FSMs are manufactured with the Boss. Must be used with a stock adapter with a pocket machined for the Boss.
Lage Folding Stock Mechanism, Left or Right Folding
|Description||PRICE||The FSM can be mounted to fold either left or right. Will add .83” to your LOP. Weighs 3.5 oz. Manufactured from 6061 aluminum and finished in black anodize. Made in the U.S.A. Lage P/N: FSM1||$59.99|
ACE Folding Stock Mechanism
|Description||PRICE||Folding Stock Mechanism (FSM). This is the same FSM used in our folding stocks. The FSM is the standard Folding Stock Mechanism. It fits between the Stock Adapter and Stock. The FSM can be mounted to fold either left or right. Will add .75” to your LOP and weighs 3.5 oz.The FSM is manufactured with the Boss. The Boss is the raised (oblong shaped) portion on the Arm (small side). ACE P/N: A500. #ACEFSM||$59.99|
2-Piece Molded Grip
|Description||PRICE||This molded polymer grip features one finger groove, ribs on the front, stippling on the sides, is more rounded on the backstrap than the stock grip and extends lower. It also features a "mag funnel" on the bottom.|
|2-Piece Molded Grip, Standard SWD, #5||$49.99|
|2-Piece Molded Grip, Sten 1, #8A||$49.99|
|2-Piece Molded Grip, Sten 2 #25A||$49.99|
2-Piece Molded Grip with Thumb Activated Magazine Release
|Description||PRICE||This molded polymer grip has the same features as the 2-piece molded grip above, with the addition of a lever above the grip to activate the heel mounted magazine release. #38||$79.99|
M-11/9 Select Fire Competition Trigger
|Description||PRICE||The Select Fire Competition Trigger provides a more ergonomic trigger and a perceived reduction in trigger pull. This trigger does not reduce the measured trigger pull of the stock M-11/9 (around 10 lbs.) However, due to the 3/8” wide trigger, the perceived trigger pull is less. Trigger is fully assembled. Disconnector and roll pin are already installed. Trigger installs the same as the OEM trigger except the wider trigger shoe is installed with two #1-64 set screws. Allen wrench required for assembly is included. This trigger is manufactured from 6061 aluminum and features a hard coat black anodized finish. The disconnector and roll pin are made from steel and black oxide finished. #169||$79.99|
M-11/9 Full Auto Only Competition Trigger
|Description||PRICE||The Full Auto Only Competition Trigger provides a more ergonomic trigger and reduces the measured trigger pull to around 8-1/4 pounds. Due to the 3/8” wide trigger, the perceived reduction in trigger pull is even less. Elimination of the disconnector and trigger spring results in a shorter and lighter trigger pull. After installation of this trigger, the gun will fire in full auto whether the selector is set to “Semi” or SMG”. A benefit of the this feature is that you will not accidentally start shooting a match with the gun shooting in semi-automatic. This trigger is manufactured from 6061 aluminum and features a hard coat black anodized finish. #168||$49.99|
|Description||PRICE||This extended safety makes it quick and easy to positively engage and disengage your safety. Great for use in subgun competitions. Get on target quickly without fumbling with the safety. Will fit the M-11/9, M-11A1, M-10/45 or M-10/9. #6||$49.99|
Internal Safety Slide
|Description||PRICE||This internal safety slide replaces the cheap cast aluminum one that came with your M-11/9. It is designed to have more bearing surface and is made from steel with a black oxide finish. The picture to the left shows the original safety slide on the top and the new and improved Lage Mfg. steel safety slide on the bottom. The picture clearly shows how the original aluminum safety slide can become warped and battered. #51||$29.99|
|Description||PRICE||This M-11/9 Sear is hardened to provide extra strength and durability. Original sears may have been improperly hardened during the rush to get as many M-11/9 machineguns manufactured and registered prior to May of 1986. If your M-11/9 ocasionally continues to fire after letting go of the trigger or "runs away", your sear may be worn. Check the tip of the sear that engages the sear notch in the bolt to make sure it is not rounded off. If it is, replace the sear. These sears are made from 4140 steel and hardened to 42-46 on the Rockwell C Scale. #106||$49.99|
|Description||PRICE||If you are experiencing extraction problems with your M-11/9, odds are you need to replace your extractor with this improved design. This new design, which is standard equipment on all Lage Manufacturing Upper Receivers, features a wider extraction groove and improved angle on the face of the extractor. In addition, it works on the M-11A1, M-11/9, M-10/9 and M-10/45, which is why we named it the Universal Extractor. This replaces our Improved Extractor. Manufactured from 4140 hardened steel and finished in black oxide, this extractor is built to last. #50||$24.00|
|Description||PRICE||This replacement buffer for the M-11/9 is manufactured from 1/4" thick neoprene. It is precision cut to insure a perfect fit and reliable performance. #63||$5.00|
Feed Lip Kits
|Steel feedlip inserts to repair your worn out Zytel magazines. Also can be used to convert a standard M-11/9 magazine to shoot .380 ACP. ***FREE Shipping*** #1||$5.00|
Internal Suppressor Gas Block
|If you plan to do alot of shooting with a sound suppressor (silencer) on your MAX-11 mk2 or MAX-11k, you will definitely want to buy one of these. The Suppressor Gas Block reduces the amount of gasses directed towards your face during shooting. #150||$20.00|
M-11/9 9mm and SWD M-11A1 .380 ACP Magazines
Shockwave 30-Round ZMAG for M-11/9 and SWD M-11A1 .380 ACP
|Description||PRICE||30 round steel magazine for the M-11/9 SMG and Semi-Autos. Also works in the SWD M-11A1 .380 ACP SMGs (Large Grip). This is the best, most reliable magazine you are going to find. These magazines were used in the Knob Creek 2015 National Subgun Match to win Top Gun! Lage Manufacturing highly recommends them. Uses standard steel SWD loader that came with your gun or the UpLULA Loader #UP60B. Shipping restrictions apply.|
|1 ZMAG 30 round Magazine. #ZMAG30||$34.95|
|6 Pack. ZMAG 30 round Magazine. #ZMAG30-6||$199.50|
|12 Pack. ZMAG 30 round Magazine. #ZMAG30-12
Shockwave 50-Round ZMAG for M-11/9 and SWD M-11A1 .380 ACP
|Description||PRICE||50 round steel magazine for the M-11/9 SMG and Semi-Autos. Also works in the SWD M-11A1 .380 ACP SMGs (Large Grip). Same as the 30 round magazine above, except holds 50 rounds! Uses standard steel SWD loader that came with your gun or the UpLULA Loader #UP60B. Shipping restrictions apply.|
|1 ZMAG 50 round Magazine. #ZMAG50||$54.95|
|6 Pack. ZMAG 50 round Magazine. #ZMAG50-6||$304.70|
|12 Pack. ZMAG 30 round Magazine. #ZMAG30-12
OEM M-11/9 SMG Parts
|Description||Bolt Assemblies, Fire Control Parts, Springs, Pins, Screws. Everything you need for your Lower Receiver or OEM upper receiver.||$Varies|
Note: All prices are subject to change without notice.