MAX-10/45 Upper Receiver

Image
Features include adjustable front and rear sights, full length M1913 scope rail and hard mount points for additional M1913 rails on right, left and bottom of front handgrip. Bottom rail included. Contained within the upper receiver is a heavy weight bolt assembly that telescopes over the barrel. The bolt weight is securely attached to the bolt assembly with two hardened cap screws- no welds to crack or break. This reduces the rate of fire (ROF) from 1,100 RPM down to around 600 RPM. Easily shoot single, double or triple round bursts- just count them off while its firing, it's that slow and easy. Due to the reduced ROF, muzzle rise is reduced and multiple rounds stay on target. The MAX-10/45 attaches to the stock M-10/45 lower receiver without any modification to the lower receiver.

The picture above shows a MAX-10/45 with additional Lage Mfg. accessories that are not included with the MAX-10/45 upper receiver. Accessories are available below. Registered lower receiver and magazine is not included.

Features:

1) Rear Sight, Adjustable 4) Front Hand Grip 7) 9" inch barrel length10) Cocking Handle (reciprocating)
2) Front Sight, Adjustable 5) Front Grip Retaining Pin 8) Flash Suppressor
3) Scope/Optics rail (Mil-Std-1913) 9.3"6) Lower Accessory Rail (Mil-Std-1913) 4" 9) Side Accessory Rail Mounting Points

Image


  • Designed for use with a M-10/45 submachinegun lower receiver.
  • Requires no modification of the lower receiver to install upper.
  • 9" barrel threaded 7/8-9 at muzzle. Other barrel threads available.
  • 9.3" long Picatinny rail along top for mounting a scope or removeable iron sights.
  • Polymer foregrip with 4" bottom Picatinny rail attached.
  • Mounting points on left and right side of foregrip for mounting additional rails.
  • Side cocking- Cocking knob located on left side. Cocking knob reciprocates with bolt.
  • 600 RPM rate of fire. 800 RPM rate of fire alos available.

Use of steel cased, reloaded/re-manufactured ammo will void the warranty.