VBS-2

The VBS is a Variable Buffer System (VBS) consisting of one to three buffer spacers. Placed behind the bolt, this short strokes the bolt when firing and increases the rate of fire. Each additional VBS spacer increases the rate of fire even more. Do not install more than the indicated quantity of VBS spacers or you will not be able to cock the bolt back far enough to catch the sear. VBS-2 is a Variable Buffer System consisting of two buffer spacers. When installed in the MAX-31 mk2, the rate of fire can be easily changed to 710 or 800 RPM. When installed in the MAX-10/31 mk2, the rate of fire can be easily changed to 610 or 700 RPM. When installed in the MAX-31C, the rate of fire can be easily changed to 699 or 769 RPM. When installed in the MAX-1031K, the rate of fire can be easily changed to 675 or 761 RPM. The rates of fire above are approximate. The rate of fire of your ammunition may vary. Different bullet weights, such as 124 gr. And 147 gr. , as well as lighter or stronger powered ammunition, will result in slower or faster rates of fire.

The VBS easily installs on your bolt assembly by simply installing it between the rubber buffer and the back of the bolt assembly. It is securely held in place with the ejector rod.

VBS Application Cross-Reference:

OEM M-11/9 VBS-3 #420
MAX-11 mk2 VBS-3 #420
MAX-11k VBS-3 #420
MAX-11sk VBS-3 #420
MAX-31 VBS-2 #424
MAX-31k VBS-1 #421
MAX-31A VBS-1 #421
MAX-10/31 VBS-2 #424
MAX-10/31K VBS-2 #424
Single VBS-1 #421

Not available for the MAX-11A1/380, MAX-11A1/9, MAX-10/9 and MAX-10/45 uppers.